Computer RFI Kits

Portable operation is fun but also brings challenges to the radio operator concerning receiver “noise” levels, RF interference from adjacent sources including close by transmitting stations, and RFI from portable generators. A typical scenario and some suggested Palomar product solutions are shown in the picture.

Portable Operation RFi Reduction Picture png - Computer RFI Kits

Portable operation is typical of ham radio operating events such as Field Day, Summits on the Air, Route 66 events, National Parks on the Air, California QSO party, DXpeditions, and emergency operation command posts, etc.

Suggestions

Each low power operating station with a generator should have:

  1. Generator RFI Kit (Part # RFI-GEN) with FSB31-1 ferrite filters at each end + Nylon ties for security
  2. Transceiver RFI Kit (Part # RFI-XCVR)
  3. Laptop RFI Kit (Part # RFI-1C)
  4. Coax Cable Noise Filter (Part # CMNF-1)
  5. Bullet-55 portable HF end fed antenna system


Refine by
 

Filters

Filters
These RFI kits are specifically selected to cure most household computer device RFI problems. It contains ferrite toroids for AC or DC power supply protection and Snap On ferrite spli beads selected to eliminate RFI from 1 to 1000 Mhz. The beads are easy to use, don’t require modification of the protected equipment and work in almost all cases, even when plug-in filters fail. 

 

 

Typical Installations

 

20131210 115137 150x150 - Computer RFI Kits

Ethernet Cable on F-240 Toroid – 7 turns

20131210 114800 150x150 - Computer RFI Kits

Ethernet Cable on FSB-1/2 – 3 turns for 9X Impedance

20131210 1148191 150x150 - Computer RFI Kits

Ethernet Cable on FSB-1/4

20131210 114716 150x150 - Computer RFI Kits

AC Cable on F-240 Toroid – 6 turns

20131210 114844 150x150 - Computer RFI Kits

DSL Modem DC Power Supply on F114-43 Toroid – 5 Turns