Model CB-6-1500 is a 6:1 (300:50) voltage balun housed in a Nema enclosure box (4″ x 4″ x 2″) with two top studs capable of input power levels up to 1.5KW PEP/500 watts continuous when used with a matched load. The 6:1 ratio takes 50 ohms input and matches to 300 ohms balanced output from 1.8-61 MHz with SWR < 1.5:1 under matched load conditions. A great balun for windoms, OCF antennas >60 feet over ground, Hertz and folded dipole antennas, T2FD etc. Dual core, Ruthroff style balun. Choose version with side eye bolts for wire attachments for OCF dipole use.
MINI-BALUN 1:1 Coax Interface to Ladder Line, Dipole elements, 500 Watts PEP, up to -38Db Common Mode Rejection, 1-61 MHz, Flagpole, Dipole, Beam and G5RV/ZS6BKW AntennasProduct DetailsBrand: Palomar EngineersMPN: MC-1-500SSCountry/Region of Manufacture: United StatesEffective Frequency Range (MHz): 1.8-60PEP Power Rating (watts): 500 SSB (25% duty cycle), 250 Watts CW/FT8 (50% duty cycle)Common Mode Attenuation (db): 20-38dbEstimated Insertion Loss (db): .25 dbInput Connector Type: SO-239 femaleOutput Connector Connector Type: Dual 1/4" stainless steel studsGround Connector (Y/N): noneEnclosure Size (LxWxH inches): 3" long, 2 in wide, 1.25" highMINI-BALUN Features:
- Uses proprietary Multi-Turn ferrite technology for maximum choking (up to -38 dB common mode noise rejection) and maximum bandwidth
- 500 Watts PEP, 50 ohm SO-239 connectors In, Dual Side Stud Output, 1.8-61 MHz (usable to 100 MHz) - AKA 1:1 BALUN
- Works for all coax fed antennas from 1.8-61 MHz (160-6 meters) - excellent for multi-band beam interface, G5RV/ZS6BKW or Flag Pole OCF antennas fed with ladder line.
- 2-5 times more common mode noise rejection, wider bandwidth and higher power then competing isolators
MINI-CHOKER feed line chokes are used to suppress common mode current carried on the outside of the coax braid which is often responsible for receiver noise and RFI in the receiver/transmitter. These chokes are very useful for suppressing RFI common mode current at the antenna feed point, at 1/2 wavelength intervals along the coax feed line and also at the entrance to the radio station.
This choke has a SO-239 input and 1/4" top studs output.
For Higher Power needs use our MAXI-CHOKER with dual stud outputs in 1.5KW or 3KW version part# MC-1-1500LL, MC-1-3000LL
If you need a unbalanced output (SO239 output) instead of a balanced stud output, see MC-1-500 with SO239 output and input..
On Sale
RG-8X Coax Jumper Cable with PL-259's on each end - 3 feetRG-8X Coax Jumper Cable with PL-259's on each end - 3 feetSKU RG-8X-3List price $19.95 Save 25%$14.95
MAXI-CHOKER Coax Line Isolator/Balun, 1-61 MHz, 1.5/3KW, SO-239 In/Stud Output, FLAGPOLE OCF, G5RV, ZS6BKW, BN4000 Replacement, Ladder Line-Coax interfaceMAXI-CHOKER Coax Line Isolator/Balun, 1-61 MHz, 1.5/3KW, SO-239 In/Stud Output, FLAGPOLE OCF, G5RV, ZS6BKW, BN4000 Replacement, Ladder Line-Coax interfaceSKU MC-1-1500LL$89.95
MINI-BALUN Features:
- Uses proprietary Multi-Turn ferrite technology for maximum choking (up to -38 dB common mode noise rejection) and maximum bandwidth
- 500 Watts PEP, 50 ohm SO-239 connectors In, Dual Side Stud Output, 1.8-61 MHz (usable to 100 MHz) - AKA 1:1 BALUN
- Works for all coax fed antennas from 1.8-61 MHz (160-6 meters) - excellent for multi-band beam interface, G5RV/ZS6BKW or Flag Pole OCF antennas fed with ladder line.
- 2-5 times more common mode noise rejection, wider bandwidth and higher power then competing isolators
MINI-CHOKER feed line chokes are used to suppress common mode current carried on the outside of the coax braid which is often responsible for receiver noise and RFI in the receiver/transmitter. These chokes are very useful for suppressing RFI common mode current at the antenna feed point, at 1/2 wavelength intervals along the coax feed line and also at the entrance to the radio station.
This choke has a SO-239 input and 1/4" top studs output.
For Higher Power needs use our MAXI-CHOKER with dual stud outputs in 1.5KW or 3KW version part# MC-1-1500LL, MC-1-3000LL
If you need a unbalanced output (SO239 output) instead of a balanced stud output, see MC-1-500 with SO239 output and input..
