50:200 (4:1) CUBE™ Current Balun, 1.8-61 MHz, 1.5KW - Loop, OCF, Folded Dipole useful to 200 MHz

Name: 50:200 (4:1) CUBE™ Current Balun, 1.8-61 MHz, 1.5KW - Loop, OCF, Folded Dipole useful to 200 MHz
Brand: Palomar Engineers
SKU: CB-4-1500EB
Price: 124.95 USD
Availability: InStock

Store/Antenna Products/CUBE Impedance Transformers (<1:1, 1:1, >1:1)/50:200 ohm (4:1) Transformers

SKU CB-4-1500EB

$124.95

Bulk pricing available for quantities of 2 units or more

Select Output Connector

Eyebolts (2) side, 1 on top for hoist (+$5.00)

Top studs (2) with wing nuts

Quantity:

Buy more, save more

Quantity	Price per item	Discount
2 items	$116.95	6% off
10 items	$108.95	13% off
100 items	$104.95	16% off

Save this product for later

50:200 (4:1) CUBE™ Current Balun, 1.8-61 MHz, 1.5KW - Loop, OCF, Folded Dipole useful to 200 MHz

Store/Antenna Products/CUBE Impedance Transformers (<1:1, 1:1, >1:1)/50:200 ohm (4:1) Transformers

Product Details

MPN: CB-4-1500

Country/Region of Manufacture: USA

Type: Balun

Input ohms/Output ohms: 50 in, 200 out

Frequency Range < 2:1 SWR (MHz): 1-31

PEP Power Rating (watts): 1500

Enclosure Size: 4" x4" x 2"

Weight (pounds): 2

Antenna Compatability: Dipoles: Extended double zepp, folded 2 wire, off center fed (OCF); Loops: Horizontal, vertical - coax fed

The CB-4-1500 balun is a multi-core current balun with an enclosure box. Input is via SO-239 coax connector and output can be top studs (for ladder line) or side eye hooks (2) and top eye hook used as a halyard hoist for supporting your wire antenna. Rated 1500 Watts PEP Watts from 1.8-61 MHz (see SWR graph).

This transformer requires a feed line choke to isolate the coax feed line from the antenna. A coax noise filter at the radio end of the coax is also recommended to reduce coax cable common mode noise.is also recommended.

Useful on these type of antennas:

Dipole, double extended
Dipole, linear load, ladder line fed
Dipole, long, non-resonant
Dipole, off-center fed (OCF)
Dipole, snake type, ladder line fed
Long wire with ground system
Multi-band, remote balun

Useful out to 200 MHZ under 2:1 SWR (see swr graph)

Need a 4:1 and 1:1 HYBRID balun? Check out our CB-4-1-1500/5000 with feedline choke built into same box as impedance transformer for ease of installation!

2:1 (100:50) Baluns are useful between 50 ohm coax and 100 ohm balanced lines for loops, cubical quads, log periodics and other antennas where the impedance at the end of the feedline is 100 ohms (1/2 wavelength feedline).