Antenna Products

Coax Common Mode Noise Filter - 1500 Watts, 1.8-60 MHz, -38 dB Common Mode Noise Suppression

SKU CMNF-1500HF
$109.95
Bulk pricing available for quantities of 2 units or more
Input/Output Connector
1
Buy more, save more
QuantityPrice per itemDiscount
2 items$104.955% off
10 items$99.959% off
50 items$94.9514% off
100 items$89.9518% off
Save this product for later
Share this product with your friends
Coax Common Mode Noise Filter - 1500 Watts, 1.8-60 MHz, -38 dB Common Mode Noise Suppression
Product Details
MPN: CMNF-1500HF
Type: NEW
Country/Region of Manufacture: United States
Filter Power Rating (PEP watts): 1500
Choking Impedance (ohms): 1000-6500
Common Mode Attenuation (db): 21-36 db
RFI Suppression Range (MHz): 1.8-60
Insertion Loss (db): .05
# Ferrite Filters: 5
Enclosure Size (inches): 4" x 4" x 2"
Typical Use:: Noise filter at radio end of coax between amplifier and antenna tuner

CMNF-1500HF for transmitter/receiver coax lines up to 1500 watts PEP - 1.8-60 MHz, -38 dB Common Mode Suppression

For coax feed lines with receive and transmit signals, you will love the small size, wide frequency range and excellent attenuation of common mode noise interference

- Reduces broadband common mode receiver noise* picked up on the outside of the antenna coax feed line.

- Wide frequency range works on all brands of radios and coax fed antennas from 1.8-60 MHz

- Common mode noise rejection up to 20-38 DB (3-6 "S" units) depending on frequency

- Simple plug & play installation: plug a short jumper from the CMNF-1500HF to your amplifier output and plug the feed line (or a jumper to your antenna tuner) into the other SO-239 CMNF-1500HF input. Either connector can be input or output. Rated at 1500 watts PEP.

- will work with Bias-T antenna switches and will pass DC voltage from input to output with no attenuation

* not effective for noise from AC power lines or noise received directly by antenna

Installation Note: For best results, and to reduce co-interference between choked and unchoked coax feed lines with multiple antennas, ALL antenna feed lines entering the radio room need to have a separate feed line choke particularly if they are at a different frequency then HF, like VHF or UHF.

If you use a antenna switch for multiple antennas in the 1.8-61 MHz range, place the CMNF-1500HF in the "common" line of the antenna coax switch and the antenna tuner/amplifier.

For additional common mode noise reduction, consider the CMNF-500HF (500 watts PEP) placed between the receiver and the amplifier.

Got Common Mode Noise? Not Sure - Find out now by clicking link below:

Palomar Engineers Common Mode Noise on Coax User Diagnosis Test


This product was formally named CMNF-2 prior to October 31, 2017