| Impedance/Isolation Transformer, 3-30 MHz, 5W PEP, 1:1-16:1, SO239, N, BNC, SMA
For impedance transformation/isolation applications when max power is 5 Watts PEP, this transformer provides a simple interface between transmission lines with different connectors or impedances or simply common mode isolation. DC continuity for bias-T applications.
- Cast Aluminum die-cast enclosure for excellent shielding and ground continuity between receiver and coaxial shield
- Wide frequency range of 3-30 MHz with SWR under 2:1 across the entire range
- Typical input impedance from 45-55 ohms, Output impedance 50-800 ohms depending on ratio selected
- Small compact size - length (tip to tip of N connectors) = 3.625", Width = 1.5", Height = 1.2"
- Low insertion loss
Power rating: 1.5 Watts (31.8dBm) 100% duty cycle, 3.0 watts (34.8 dBm) 50% duty cycle (CW), 5 watts (37 dBm) 30% duty cycle (SSB/PEP)
Impedance ratios available from 1:1, 2;1, 4;1, 6:1, 9:1, 12;1, 16:1
Connectors: SO-239, N, BNC, SMA
Picture shows 50 ohm input, 800 ohm output with N connectors
Receiver Only Unun transformers are made to order with manufacturing time of 5 or more days before shipment depending upon quantity.
Contact company for specific needs