Common Mode Noise Filter – Coax

Ferrite Snap On Combo Pack, Mix 31,61,75 ID=1/2"/12.7mm, RFI Range 150 KHz-2000 MHz, 10 Filters

FSCP-316175-1/2-10
$69.95
In stock
1
Product Details
Initial Permeability (@ 10KHz): 1500
Material: MnZn
Max cable size - in/mm: .5/12.7
OD (A) - in/mm: 1.22/31
ID (B) - in/mm: .514/13.1
Length (C) - in/mm: 1.55/5
Z (ohms per bead - single turn 1 MHz): 25
Z (ohms per bead - single turn 5 MHz): 71
Z (ohms per bead - single turn 10 MHz): 100
Z (ohms per bead - single turn 25 MHz): 156
Z (ohms per bead - single turn 100 MHz): 260
Z ohms (per bead - single turn 250 MHz): 260

Now you can get a ferrite snap on combo pack of 10 RFI filters in our most popular 1/2" size with all three filter ranges (great if you don't know the interfering frequency and need to cover the entire range when troubleshooting an RFI problem).

Mix 75 covers 150 KHz to 10 MHz (3 filters)

Mix 31 covers 1-300 MHz (usable to 500 MHz) (4 filters)

Mix 61 covers 200-2000 MHz (3 filters)

Use multiple turns for best results. (2 turns - 4 times a single turn, 3 turns = 9 times a single turn, etc.)

Save this product for later

 

Typical user comment:

The filter was quite effective. Was surprised that it actually reduced the noise level
more than the signal so S+N/N improved by 1.9 S units.

Bill