Mobile Station RFI Kits

Ferrite Snap On Combo Pack, Mix 31, RFI Range 1-300 MHz - 1/4, 3/8, 1/2, 3/4 - 22 filters

FSCP-31-22
$95.00
In stock
1
Product Details
Brand: Palomar Engineers
UPC: Does not apply
MPN: FSCP-31-22
Type: NEW
Country/Region of Manufacture: United States

Mix 31 Ferrite Snap On Combo pack (RFI Suppression range is 1-300 MHz)

The Ferrite Snap On Combo Pack is a convenient solution for troubleshooting RFI/EMI with various diameter cables ranging from 1/4″ to 3/4″ for use as either single turn or multiple turn ferrite chokes.

The snap on chokes are useful for RF coax, AC/DC power cables, and device interconnection cables.

Always use a snap on ferrite with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turns in series).

Included in the combo pack are our most popular snap on sizes as follows:

FSB31-1/4 – 1/4″ ID – 6 pieces

FSB31-3/8 – 3/8″ ID – 6 pieces

FSB31-1/2 – 1/2″ ID – 6 pieces

FSB31-3/4 – 3/4″ ID – 4 pieces


Save this product for later
Mobile RFI kits work two ways: They suppress RFI from on board computers and other sensing/control devices in your vehicle that may cause your radio to be a VICTIM of RFI, and second they suppress RFI generated by your radio as a SOURCE which may affect your on board computers or other devices.  Mobile operations of HF radios (1-30 Mhz) tend to experience more RFI effects than VHF/UHF mobile stations.  If you have both HF and VHF installations in your vehicles, you may need both kits.

To address separate solutions we have developed two separate RFI kits: one for HF (1.8-300 MHz) mobile installations and another for VHF/UHF (30-1000 MHz) mobile installations.  Each kit uses the appropriate ferrite mix for the frequency range desired.