5:1 Baluns/Ununs

5:1 CUBE™ Unun – Model CU-5-1500 (50:250 Ohm, 1.8-61 MHz, 1.5KW PEP)

Application. For traveling wave, end fed or portable 20-31 foot vertical antennas the 5:1 unun makes a good transformer for converting 50 ohm coax to a 250 ohm feed point. If you use the antenna on multiple bands, the feed point impedance may not always be 250 ohms and use of the unun at high (>350 ohms) or low (<100 ohms) will require reduced power input or the unun may have its power ratings exceeded and damage to the unun may occur. The (5:1 conversion ratio will change for loads other than 250 ohms unbalanced.

Typical application:

CU 5 1500 antenna - 5:1 Baluns/Ununs

Also available as a balanced output – CB-5-1500

Ferrite Snap On Combo Pack, Mix 31, RFI Range 1-300 MHz - 1/4, 3/8, 1/2, 3/4 - 22 filters

FSCP-31-22
$95.00
In stock
1
Product Details
Brand: Palomar Engineers
UPC: Does not apply
MPN: FSCP-31-22
Type: NEW
Country/Region of Manufacture: United States

Mix 31 Ferrite Snap On Combo pack (RFI Suppression range is 1-300 MHz)

The Ferrite Snap On Combo Pack is a convenient solution for troubleshooting RFI/EMI with various diameter cables ranging from 1/4″ to 3/4″ for use as either single turn or multiple turn ferrite chokes.

The snap on chokes are useful for RF coax, AC/DC power cables, and device interconnection cables.

Always use a snap on ferrite with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turns in series).

Included in the combo pack are our most popular snap on sizes as follows:

FSB31-1/4 – 1/4″ ID – 6 pieces

FSB31-3/8 – 3/8″ ID – 6 pieces

FSB31-1/2 – 1/2″ ID – 6 pieces

FSB31-3/4 – 3/4″ ID – 4 pieces


Save this product for later