Not sure of your interference RFi frequency? Then try using each of the mixes on your RFI problem to determine which one works the best. This Ferrite Ring Mini-Combo 5 Pack is a convenient solution for troubleshooting RFI/EMI from unknown frequencies or multiple frequencies that require multiple suppression mixes. Included in this combo pack are five 2.4″ OD/1.4″ ID ring toroids as follows:

Mix 75 effective RFI from .15-10 MHz including AM Broadcast band – quantity: 1

Mix 31 effective RFI from 1-300 MHz for general purpose – quantity: 1

Mix 43 effective RFI from 20-250 MHz for general purpose – quantity: 1

Mix 52 effective RFI from 200-1000 MHz for general purpose – quantity: 1

Mix 61 effective RFI from 200-2000 MHz for cell phone, WIFI, HDTV, Cable TV interference – quantity: 1

Individually wrapped and labeled with effective RFI frequency range for easy identification

The ring toroids are useful for AC/DC common mode choking with multiple turns as shown below

AC Cable on F-240 Toroid – 7 turns

DC Cable on F240 – 4 turns

The ring toroids can also be used on coax or signal lines as shown below:

RG58 12 turns on FT240

Ethernet Cable on F-240 Toroid – 7 turns

For RFI/EMI wrap as many turns as possible (usually 6-12) for higher choking (under 30 MHz). For over 25-100 MHz, 1-3 turns om Mix 61 is usually sufficient. Chokes can also be cascaded in series to offer a broader frequency range.