16:1 Baluns/Ununs

Ferrite Mini Snap On Combo Pack, Mix 31, RFI Range 1-300 MHz - 10 filters (3/8, 1/2, 3/4)

FMSCP-31-10
$49.95
In stock
1
Product Details
Brand: Palomar Engineers
UPC: Does not apply
MPN: FMSCP-31-10
Type: NEW
Country/Region of Manufacture: United States

The Ferrite Snap On Combo Pack is a convenient solution for troubleshooting RFI/EMI with various diameter cables ranging from 3/8″ to 3/4″ for use as either single turn or multiple turn ferrite chokes.

The snap on chokes are useful for RF coax, AC/DC power cables, and device interconnection cables.

Always use a snap on with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turns). Included in these combo packs are our most popular snap on sizes as follows:

Mix 31 Ferrite Snap On Combo ten pack (RFI Suppression range is 1-300 MHz)

FSB31-3/8 – 3/8″ ID – 4 pieces

FSB31-1/2 – 1/2″ ID – 4 pieces

FSB31-3/4 – 3/4″ ID – 2 pieces

Normal Retail price is $56 for these parts

Save this product for later
16:1 Baluns are useful between 750-850 ohm balanced loads where the impedance at the  end of the feed line is 800 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic,  T2FD and traveling wave antennas.

16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna.  Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.