16:1 Baluns/Ununs

50:800 ohm (16:1) CUBE™ Balun, 1-31 MHz, 1KW/2KW PEP

CB-16-1000TS
$119.95
In stock
1
Product Details
Type: BALUN
Input ohms/Output ohms: 50 in/800 out balanced
Frequency Range < 2:1 SWR (MHz): 1-31 MHz
PEP Power Rating (watts): 1000/2000
Insertion Loss (dB): .2
Input Connector: SO-239 UHF
Output Connector(s): Top Studs/Side Eyebolts
Transformer Topology: broadband binocular core
Hardware Type: Stainless Steel
Enclosure Size: 4" x 4" x 2"
Weight (pounds): <2
Antenna Compatability: T2FD, Rhombic, V beam

Available in eyebolts or top stud versions and 1KW/2KW PEP ratings. Excellent SWR over 1-31 MHz range.

Manual Down Load for CB-16-1000/2000

Save this product for later
16:1 Baluns are useful between 750-850 ohm balanced loads where the impedance at the  end of the feed line is 800 ohms (1/2 wavelength feed line), or high impedance feeds for rhombic,  T2FD and traveling wave antennas.

16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna.  Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier.