Antenna Products

100:50 ohm (2:1) HF Balun or Unun Core Kit, 1.8-61 MHz, 500 watts Preassembled

SKU BA-2-500B
In stock
Product Details
Model BA-2-500 is a 2:1 balun/unun kit used to translate a 50 ohm input to 100 ohms at RF power levels up to 500 watts PEP from 1.8-61 MHz when used with a matched load. The kit comes pre-assembled (already wound and SO-239 connected – just add your own enclosure box) and an instruction manual with directions to connect the kit as a 2 to 1 balun (two port balanced antenna to unbalanced coax input) or 2 to 1 unun (one port unbalanced antenna and one port ground to unbalanced coax input). With a matched 100 ohm load the SWR over the frequency range 1.8 to 61 MHz is shown in the following table measured with an AIM 4170 network analyzer. Notice that the conversion from 100 to 50 ohms is very consistent from 1.8-61 Mhz and SWR is less than 1.6:1 over the range allowing easy tuning by most radio internal antenna tuners or an external tuner. Graph is for a 2:1 balun often used with delta loop, quad or horizontal loop antennas. Kits fit into 4″ x 4″ x 2″ box (Part# CB-Box-1). BA 2 500 SWR 1 61 MHz png - Antenna Products
Save this product for later
Palomar antenna products include feed line chokes, feed line to antenna matching transformers, static bleeders and other accessories. Click on the link to connect to the product you need.