Store

Common Mode Coax Noise Filter, 4KW PEP, 500 KHz-5 MHz

CU-1-4000BCI

Common Mode Coax Noise Filter, 4KW PEP, 500 KHz-5 MHz CU-1-4000BCI

Purpose. The CU-1-4000BCI is a 50Ω to 50Ω feed line choke/line isolator/noise filter, for the AM broadcast band frequencies, with “N” connector input and output connectors. The choke is rated at 4 KW watts PEP into a matched load for .5-5 MHz. The balun/unun is designed to have a high RF impedance to common mode currents on the outside of the coax braid while passing RF currents on the inside of the coax braid to the antenna (see graph below)

For maximum common mode current protection (and receiver noise floor reduction due to common mode current pickup by the coaxial braid), use one common CU-1-4000BCI at the antenna and another at the transmitter equipment connection or output of antenna tuner.


Typical common mode choking impedance for CB-1-4000BCI / CU-1-4000BCI is shown in the graph below:

CB 1 4000BCI Graph png - Store


$99.95 In stock
Brand:Palomar Engineers
MPN:CU-1-4000BCI
Effective Frequency Range (MHz)::.5-2.1 MHz
PEP Power Rating (watts):4000
Estimated Insertion Loss (db)::.10
Input Connector Type::UG-58 "N" female
Output Connector Connector Type::UG-58 "N" female
Ground Connector (Y/N)::none
Enclosure Size (LxWxH inches)::4 x 4 x 4
Common Mode Coax Noise Filter, 4KW PEP, 500 KHz-5 MHz