2:1 Baluns/Ununs

50:100 (2:1) CUBE™ Balun/Unun 1.8-61 MHz, 2KW, Loop Antennas

CB-2-2000

50:100 (2:1) CUBE™ Balun/Unun  1.8-61 MHz, 2KW, Loop Antennas CB-2-2000

Model CB-2-2000 is a 2:1 (100:50) quad core balun used to translate a 50 ohm input to 100 ohms at RF power levels up to 2000 watts PEP when used with a matched load such as a delta loop, quad or loop skywire. This assembled balun features a quad core configuration for increased power handling and flatter frequency response to 60 Mhz. With a matched 100 ohm load the SWR over the frequency range 1.8 to 30 MHz the conversion from 100 to 50 ohms is very consistent from 1.8-31 MHz and SWR is less than 1.5:1 over the range allowing easy tuning by most radio internal antenna tuners or an external tuner.

$79.95 In stock
UPC:Does not apply
Brand:Palomar Enginers
Model:CB-2-2000
MPN:CB-2-2000
Frequency Band(s):160-6 meters
Country/Region of Manufacture:USA
Type:Balanced output (BALUN)
input ohms/output ohms::50
Frequency Range (MHz):1-61
PEP Power Rating (watts)::2000
Output Connector Top studs/wingnuts (2) (0) Side eyebolts, top eyebolt halyard hoist (5) top stud, side stud (Unun) (0)
50:100 (2:1) CUBE™ Balun/Unun  1.8-61 MHz, 2KW, Loop Antennas50:100 (2:1) CUBE™ Balun/Unun  1.8-61 MHz, 2KW, Loop Antennas
2:1 (100:50) Baluns are useful between 50 ohm coax and 100 ohm balanced lines for loops, cubical quads, log periodics and other antennas where the impedance at the end of the feedline is 100 ohms (1/2 wavelength feedline).